12
Battery installation:
• Insert the battery so that contact pins +/- will
face downwards.
• After inserting the battery, put the battery cover
back and slide it upwards.
Charging the battery:
Important! You should use the charger included in the set.
Using other chargers might damage the phone and will void
the warranty.
Never connect the charger if the back cover is removed.
To charge the phone:
1. Plug the charger into a power outlet.
2. Plug the charger into the jack located at the bottom
of the phone. A message about charging will appear
on the display, and the bars in the battery icon will
keep blinking as long the battery charging is in
process.
3. As soon as the battery is fully charged, unplug the
charger from the power outlet, and then cable from
the phone.
To Next Page
Loading...
Need help?
General
