Maxcom MM721 User Manual

13
Notes:
o Before you start the charging process, make sure
the phone’s battery in correctly installed.
o Never remove the battery while charging - doing
so could damage the phone.
o If the battery voltage is too low for your phone to
work, a message will appear about expected
power-off and then the phone will be automatically
switched off.
o If the battery is totally discharged (e.g. due to
keeping a torch on), after plugging in the charger,
you might wait several minutes before a charging
icon appears.
Low Battery Alert 2.3
The telephone will make an alert beep (if alert sounds are
enabled in the profile) and a message „Battery Critically
Low” will appear on the display screen if the battery level is
too low. An icon will appear on the display screen. If
you see such a message, recharge your battery.

Maxcom MM721 Specifications

General

Type	Entry-level phone
Product color	Black
Built-in flashlight	Yes
Subscription type	-
Display diagonal	2.2 \
Display resolution	176 x 220 pixels
Form factor	Bar
Phonebook capacity	500 entries
Personal info management (PIM)	Alarm clock, SOS
Rear camera resolution (numeric)	2 MP
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	4 GB
Standby time	350 h
Cables included	USB
2G bands (primary SIM)	900, 1800 MHz
2G bands (secondary SIM)	900, 2100 MHz
Mobile network generation	3G
Talk time (2G)	4.5 h
Talk time (3G)	2.5 h
Battery capacity	800 mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	12 mm
Width	48 mm
Height	124 mm
Weight	84 g