Maxcom MM721 User Manual

33
Additionally, if there is an unread text message, a LED
indicator flashes blue (if it is enabled).
To enter MENU Text Messages, you should press the UP
key in the Idle mode, and next select Messages->Inbox.
When the inbox is full, the icon will go blinking. To
solve the problem, delete messages out of the inbox.
Creating and Sending Text Messages 9.1
1. Enter MENU, and then select: Messages>Create
Message->Text Message to enter a text editor,
2. Type your text message,
 Changing input modes: To be able to change the
Input Mode (digits, lower and uppercase letters),
press the „#” key; if you want to insert a symbol,
press „ ”,
3. Sending text messages: Press the green
receiver key to enter “Options”, select “Send to”,
and select whether you want to manually enter the
number or select the number from the Phonebook.
Select the number and press “OK”. If you want to
text multiple recipients, you might add several
numbers. To send the message, press “Send”,
4. Saving the message: To save the message you
have just typed, press the green receiver key, and
then select „Save in Drafts” . The message will be
saved in Drafts. You can decide for the sent
messages to be automatically saved, to do so, go

Maxcom MM721 Specifications

General

Type	Entry-level phone
Product color	Black
Built-in flashlight	Yes
Subscription type	-
Display diagonal	2.2 \
Display resolution	176 x 220 pixels
Form factor	Bar
Phonebook capacity	500 entries
Personal info management (PIM)	Alarm clock, SOS
Rear camera resolution (numeric)	2 MP
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	4 GB
Standby time	350 h
Cables included	USB
2G bands (primary SIM)	900, 1800 MHz
2G bands (secondary SIM)	900, 2100 MHz
Mobile network generation	3G
Talk time (2G)	4.5 h
Talk time (3G)	2.5 h
Battery capacity	800 mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	12 mm
Width	48 mm
Height	124 mm
Weight	84 g