4. Using the Telephone
Switching on the Phone 4.1
Press and hold the red receiver/end call/power key to
switch on the phone.
If the message asking for the PIN code appears, you must
enter your PIN. You can find the PIN in the SIM Card
starter kit. Upon entering the code, press the green
receiver key to confirm.
Then, when the phone is used for the first time with a
given SIM Card (or after restoring factory settings) the
phone will automatically update the date and time (service
depends on the service provider) and you will have an
option to copy contacts from the SIM Card to the phone. A
message: “Import All from SIM to Phone?” will appear.
Select: “Yes”, if you want to import all contacts from the
SIM Card to the phone memory. Otherwise, press: “No”.
Warning: If you enter an incorrect PIN three times
in a raw your SIM Card will be locked. You might
unlock your Card by entering the PUK code. If you
enter an incorrect PUK code ten times in a raw, the
SIM Card will be permanently locked.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
