Maxcom MM721 User Manual

52
to home, all incoming calls and incoming roaming calls.
You can also update a call barring code.
14.4.5 Advanced Settings
 Auto Redial: if enabled, the telephone
automatically redials the number if you fail to get
connected,
 Time Reminder: You can set a signal to remind
you of length of your call. You will hear a beep
informing you that your time is up every set period
(31-60sec.) or after a set period (2-3000sec.),
 Answering incoming phone calls: You can set to
answer incoming phone calls by pressing any key
or automatically when the headset is in use.
Network Settings 14.5
 Selecting network: You can select a service
provider manually or automatically. After selecting
a given service provider, the phone might switch
between 2G and 3G networks.
 Service selection: Allows to select whether the
phone will use GSM (2G) or WCDMA (3G)
network,
 Network Information: Allows to check basic
information about the network,
 GPRS Connection: Allows to select whether the
GPRS connection is to be established as wanted
or permanently
 Preferred GPRS transfer

Maxcom MM721 Specifications

General

Type	Entry-level phone
Product color	Black
Built-in flashlight	Yes
Subscription type	-
Display diagonal	2.2 \
Display resolution	176 x 220 pixels
Form factor	Bar
Phonebook capacity	500 entries
Personal info management (PIM)	Alarm clock, SOS
Rear camera resolution (numeric)	2 MP
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	4 GB
Standby time	350 h
Cables included	USB
2G bands (primary SIM)	900, 1800 MHz
2G bands (secondary SIM)	900, 2100 MHz
Mobile network generation	3G
Talk time (2G)	4.5 h
Talk time (3G)	2.5 h
Battery capacity	800 mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	12 mm
Width	48 mm
Height	124 mm
Weight	84 g