Maxcom MM721 User Manual

9
 Never repair or try to modify your phone by your own.
Only qualified service is authorized to repair the
phone.
 Use only original batteries and chargers. Use of any
unauthorized accessories could damage your phone
or might cause an explosion.
LIQUID RESISTANCE – the phone is NOT water or
liquid resistant. Keep your telephone dry at all times.
2. Getting Started
Before switching on the phone, you need to correctly
install the Subscriber Identity Module (SIM) Card. Pay
close attention not to damage the Card while inserting it.
Keep SIM cards away from children.
SIM Card and Battery Installation 2.1
Before inserting the SIM Card make sure the phone is
switched off. The charger should be disconnected as well.
To insert the SIM Card, first remove the battery. To
remove the battery, follow the instructions and drawings
below:
 When the phone is switched off, with your
fingernail lever up the battery cover on the right
hand side of the phone,
 Remove the battery by levering it up with your
fingernail from the top side of the phone,

Maxcom MM721 Specifications

General

Type	Entry-level phone
Product color	Black
Built-in flashlight	Yes
Subscription type	-
Display diagonal	2.2 \
Display resolution	176 x 220 pixels
Form factor	Bar
Phonebook capacity	500 entries
Personal info management (PIM)	Alarm clock, SOS
Rear camera resolution (numeric)	2 MP
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	4 GB
Standby time	350 h
Cables included	USB
2G bands (primary SIM)	900, 1800 MHz
2G bands (secondary SIM)	900, 2100 MHz
Mobile network generation	3G
Talk time (2G)	4.5 h
Talk time (3G)	2.5 h
Battery capacity	800 mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	12 mm
Width	48 mm
Height	124 mm
Weight	84 g