12
MASTER SELECT
SWITCH
(OFF)
FIG. 12-1C
MASTER SELECT SWITCH
The master select switch (FIGS. 12-1B,
12-2B and 12-2C) applies or removes
battery power from the pump(s). For a single
pump box (FIGS. 12-1A and 12-1B), turn the
MASTER SELECT SWITCH to 1 to operate
Liftgate.
PUMP BOX CONTROLS
SINGLE PUMP BOX
FIG. 12-1A
If the Liftgate is equipped with a dual
pump box, the MASTER SELECT
SWITCH (FIG. 12-1B) can be used to
connect battery power to either pump 1
or pump 2 to power Liftgate. To remove
battery power from pumps 1 and 2, turn
switch OFF (FIG. 12-1C).
MASTER SELECT
SWITCH
(PUMP 1 SELECTED)
FIG. 12-1B
To Next Page
Loading...
