Maxon BMR-44 - Unloading Vehicle; Opening the Platform; Lowering the Platform

19
OPENING THE PLATFORM
UNLOADING VEHICLE
LOWERING THE PLATFORM
FIG. 19-3
To lower platform to the ground,
use runner switch as shown
in FIG. 19-3. Release toggle
switch when platform reaches
the ground.
Push column UP/DOWN toggle switch to
DOWN position (FIG. 19-1) to lower platform
(FIG. 19-2A) until runner arrow and column
decal are about even (FIG. 19-2B). Platform
will be released from the locking wedges on the
Liftgate column. Next, use column switches 1
and 2 to UNFOLD platform (FIG. 19-2A). Hold
both toggle switches until platform reaches the
unfolded (horizontal) position and then release
the switches.
FIG. 19-2A
COLUMN SWITCH
FIG. 19-1
DOWN
FIG. 19-2B
UNFOLD
INBOARD
EDGE
RUNNER
SWITCH
COLUMN
DECAL
RUNNER
ARROW
STAND CLEAR OF
PLATFORM
(REFER TO DECALS
& PLATES)
DOWN
1
2