16
Place all loads as close as
possible to the inboard edge of
the platform with heaviest part
toward the truck body as shown
in FIG. 16-1. Move loads
across the ramp (FIG. 16-1)
to the platform, but never rest
or raise loads on the ramp. If
standing on platform with the
load, stand in the footprint area
shown and comply with the
preceding WARNING.
A load should never extend past the edges of the platform. Do not
place unstable loads on platform and do not allow load to exceed
lifting capacity of Liftgate. If standing on platform, do not allow your
feet to extend beyond inboard edge of platform.
WARNING
!
RAMP
INBOARD
EDGE
LOADING PLATFORM AT GROUND LEVEL
FIG. 16-1
LOADING VEHICLE - Continued
POSITIONING LOAD
To Next Page
Loading...
