Maxon BMR-44 - Opening Ramp to Retention Position

20
OPENING RAMP TO RETENTION POSITION
UNLOADING VEHICLE - Continued
To unfold retention ramp, pull
lock mechanism in direction of
arrow (FIG. 20-1) and lift the
retention ramp until it locks
in the retention position (FIG.
20-2).
FIG. 20-2
STOWED
POSITION
RETENTION
POSITION
A ramp in retention position can trip you when stepping over it. To
prevent possible injury, get on the platform before putting the ramp
in retention position.
CAUTION
!
FIG. 20-1
LOCK
(PULL TO RELEASE)
RAMP