22
INBOARD
EDGE
A load should never extend past the edges of the platform. Do not
place unstable loads on platform and do not allow load to exceed
lifting capacity of Liftgate. If standing on platform, do not allow your
feet to extend beyond inboard edge of platform.
WARNING
!
UNLOADING VEHICLE - Continued
POSITIONING LOAD
PUSHING LOAD ON PLATFORM
FIG. 22-1
Load the platform at bed level
(FIG. 22-1) as follows. Push load
out of the vehicle to correct posi-
tion on the platform. Place all loads
as close as possible to the inboard
edge of the platform with heaviest
part toward the vehicle body as
shown in FIG. 22-1. If standing on
platform with the load, stand in the
footprint area shown and comply
with the WARNING at the
top of this page.
Pulling the load from vehicle to platform can result in a fall from
platform and serious injury. When unloading vehicle, always push
the load out on the platform.
!
WARNING
To Next Page
Loading...
