Maxon Intelimax+4G - Telnet Command Usage: STAT, SETUP, AT

Intelimax+4G User Manual
- 65 -
configuration, configure via AT command, use ping function, show uptime reboot and
reset the modem remotely to factory default using option provided i.e stat, setup, at,
ping, uptime, reboot and defconfig respectively.
STAT
• Status of INTELIMAX+
Log
Shows the syslog information if it is not set as remote syslog
Sysinfo
Shows F/W version and system Time and IP Address of Intelimax+
DNS
Display Primary DNS and secondary DNS address of Intelimax+