Maxon Intelimax+4G - Telnet SETUP Commands: SYSTEM and DDNS

Intelimax+4G User Manual
- 66 -
SETUP
SYSTEM
1. SYSTEM
Users can change Admin password, telnet port, Enable/Disable
Remote Syslog and can enter up to three phone number for SMS
2. DDNS
Users can configure Dynamic DNS using this command. Currently
only support settings for Dyn DNS Service.
3. MODE
Intelimax+ support IP stack and Serial mode only, using this
option(Mode) users can configure WAN scheduler, UART/Serial
port setting and IP stack setting
4. SNMP
Users can enable/disable this feature that allows network
monitoring
5. SNTP
Users can enter server address, Activate and De-activate day light
saving and even change time zone