!
Chapter 3. Configuration settings over web
browser
The router can be configured through your web browser. A web browser is included as a standard
application in the following operating systems: Linux, Mac OS, Windows 98 /NT /2000 /XP /Me /Vista
/7 /8, etc. The product provides an easy and user-friendly interface for configuration.
There are various ways to connect the router, either through an external repeater/hub or connect
directly to your PC. However, make sure that your PC has an Ethernet interface properly installed
prior to connecting the router.
You must configure your PC to obtain an IP address through a DHCP server or a fixed IP address
that must be in the same subnet as the router. The best and easiest way is to configure the PC to
get an IP address automatically from the router using DHCP. If you encounter any problems
accessing the router web interface it is advisable to uninstall your firewall program on your PC, as
these tend to cause problems accessing the IP address of the router.
3.1 Configuring PC in Windows
1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network
Connections.
2. Double-click Local Area Connection.
To Next Page
Loading...