Maxon MULTIMAX MA 2040 - Configuration -> Firewall

!
MULTIMAX(USER(GUIDE(
37!
!
Arrives At
Port
The port of the internet side which you want to forward to LAN side.
Null
Is Forwarded
to IP Address
The device’s IP on the LAN side which you want to forward the data to.
Null
Is Forwarded
to Port
The device’s port on the LAN side which you want to forward the data
to.
Null
Protocol
Select from “TCP”, “UDP” or “TCP&UDP” which depends on the
application.
TCP
DMZ
DMZ @ NAT/DMZ
Item
Description
Defaul
t
DMZ
DMZ host is a host on the internal network that has all ports exposed,
except those ports otherwise forwarded.
Null
Enable DMZ
Select to enable the DMZ function.
Enabl
e
DMZ Host
Enter the IP address of the DMZ host which on the internal network.
0.0.0.0
Source
Address
Set the address which can talk to the DMZ host. Null means for any
addresses.
0.0.0.0
3.13 Configuration -> Firewall
This section allows users to set the firewall parameters.
Filter Basic Settings
Filter Basic Settings @ Firewall
Item
Description
Defaul
t
Remote
Enable to allow users to access the router remotely on the internet
Enable