Maxon MULTIMAX MA 2040 - Configuration -> PPTP

!
!
!
!
58(
MULTIMAX(USER(GUIDE!
!
3.19 Configuration -> PPTP
This section allows users to set the PPTP parameters.
Client
PPTP Client @ PPTP
Item
Description
Default
Enable
Enable PPTP Client. The max tunnel accounts are 3.
Null
Disable
Disable PPTP Client.
Null
Server Name
Enter your PPTP server’s public IP or domain name.
Null
Username
Enter the username which was provided by your PPTP server.
Null
Password
Enter the password which was provided by your PPTP server.
Null
Authentication
Select from “Auto”, “PAP”, “CHAP”, “MS-CHAP v1” and
“MS-CHAP v2”.
You need to select the corresponding authentication method
based on the server’s authentication method. When you select
“Auto”, router will auto select the correct method based on
server’s method.
Auto
Remote
Subnet
Enter PPTP remote Protected subnet’s address.
Null
Remote
Subnet Mask
Enter PPTP remote Protected subnet’s mask.
Null
Enable MPPE
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a
protocol for encrypting data across PPP and VPN links.
Disable
Enable PPTP
Tick to enable the PPTP client advanced setting.
Disable