Maxon MULTIMAX MA 2040 - Page 58

!
MULTIMAX(USER(GUIDE(
57!
!
Enable L2TP
Server
Advanced
Tick to show the L2TP server advanced setting.
Disable
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as
default.
Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as
default.
Enable
Asyncmap
Value
One of the L2TP initialization strings. In general, you don’t need to
modify this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of
packet, which is possible to receive in a given environment.
1500
MTU
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
1436
Link Detection
Interval
Specify the interval between L2TP client and server.
To check the connectivity of a tunnel, the client and server
regularly send PPP Echo to each other. If the client or server
receives no response from the peer within a specified period of
time, it retransmits the PPP echo. If it receives no response from the
peer after transmitting the PPP echo for max retries times, it
considers that the L2TP tunnel is down and tries tore-establish a
tunnel with the peer.
30
Link Detection
Max Retries
Specify the max retries times for L2TP link detection.
5
Expert Options
You can enter some other PPP initialization strings in this field. Each
string can be separated by a space.
noccp
nobsdco
mp
Route Table List
Click “Add” to add a route rule from L2TP server to L2TP client.
Null