Maxon MULTIMAX MA 2040 - Page 57

!
!
!
!
56(
MULTIMAX(USER(GUIDE!
!
Server
L2TP Server @ L2TP
Item
Description
Default
Enable L2TP
Server
Tick to enable L2TP server.
Disable
Username
Set the username which will assign to L2TP client.
Null
Password
Set the password which will assign to L2TP client.
Null
Authentication
Select from “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
L2TP client need to select the same authentication method based
on this server’s authentication method.
CHAP
Enable Tunnel
Authentication
Tick to enable tunnel authentication and enter the tunnel secret
which will provide to L2TP client.
Disable
Local IP
Set the IP address of L2TP server.
10.0.0.1
IP Pool Start
Set the IP pool start IP address which will assign to the L2TP clients.
10.0.0.2
IP Pool End
Set the IP pool end IP address which will assign to the L2TP clients.
10.0.0.10
0