Maxon MULTIMAX MA 2040 - CLI Quick Start Examples

!
MULTIMAX(USER(GUIDE(
71!
!
Reboot Time1
Specify time1 when you need router reboot.
Null
Reboot Time2
Specify time2 when you need router reboot.
Null
Reboot Time3
Specify time3 when you need router reboot.
Null
3.25 Configuration -> Syslog
This section allows users to set the syslog parameters.
Syslog
Item
Description
Default
Save Position
Select the save position from “None”, “Flash” and “SD”. “None”
means syslog is only saved in RAM, and will be cleared after
reboot.
NONE
Log Level
Select form “DEBUG”, “INFO”, “NOTICE”, “WARNING”, “ERR”,
“CRIT”, “ALERT” and “EMERG” which from low to high. The lower
level will output more syslog in detail.
DEBUG
Keep Days
Specify the syslog keep days for router to clear the old syslog.
14
Log to Remote
System
Enable to allow router sending syslog to the remote syslog server.
You need to enter the IP and Port of the syslog server.
Disable
3.26 Configuration -> Phone Book
This section allows users to set the Phone Book parameters.
Phone Book
Item
Description
Default
Description
Set the name to your relevant phone No.
Null
Phone No.
Enter your phone No.
Null