Maxon MULTIMAX MA 2040 - Status -> Event;Log; Configuration -> Link Management

!
MULTIMAX(USER(GUIDE(
29!
!
3.8 Status -> Event/Log
This section displays the router’s event/log information. You need to enable router to output the log
and select the log level first, then you can view the log information here.
3.9 Configuration -> Link Management
This section allows users to set the WAN link and the related parameters.
Link Management
Item
Description
Defa
ult
WAN Link
Selected from “Cellular Only”, “Eth0 Only”, “Eth0 as primary and if fail use
cellular” and “Cellular as primary and if fail use Eth0”.
Cellular Only: Select to make cellular as the only WAN link.
Eth0 Only: Select to make Eth0 as the only WAN link
Eth0 as primary and if fail use cellular: Select to make Eth0 as the primary
WAN link and cellular as the secondary WAN link.
Cellular as primary and if fail use Eth0: Select to make cellular as the
primary WAN link and Eth0 as the secondary WAN link.
Cellul
ar
Only
ICMP
Detection
Primary
Server
Router will ping this primary address/domain name to check that if the
current connectivity is active.
Null
ICMP
Detection
Secondary
Server
Router will ping this secondary address/domain name to check that if
the current connectivity is active.
Null
ICMP
Detection
Interval
Set the ping interval time.
Null
ICMP
Detection
Timeout
Set the ping timeout.
30
ICMP
Detection
If Router ping the preset address/domain name time out continuously for
Max Retries time, it will consider that the connection has been lost.
3