Maxon MULTIMAX MA 2040 - Ethernet Interface Configuration

!
!
!
!
30(
MULTIMAX(USER(GUIDE!
!
Retries
Reset The
Interface
Enable to reset the cellular/ETH0 interface after the max ICMP detection
retries.
3
3.10 Configuration -> Cellular WAN
This section allows users to set the Cellular WAN and the related parameters.
Note: This section will not be displayed if you select “Eth0 Only” in “Configuration”->”Link
Management”->”WAN Link”.
Basic
Cellular WAN @ Basic
Item
Description
Default
Network
Provider Type
Select from “Auto”, “Custom” or the ISP name you preset in
“Configuration”->”Cellular WAN”->”ISP Profile”.
Auto: Router will get the ISP information from SIM card, and set the
APN, username and password automatically. This option only works
when the SIM card is from well-known ISP.
Custom: Users need to set the APN, username and password
manually.
Auto
APN
Access Point Name for cellular dial-up connection, provided by local
ISP.
Null
Username
User Name for cellular dial-up connection, provided by local ISP.
Null
Password
Password for cellular dial-up connection, provided by local ISP.
Null
Dialup No.
Dialup number for cellular dial-up connection, provided by local ISP.
*99***1#
PIN code
request
After click this button, you could input your SIM’s PIN and store the
current PIN in its memory, and then enter the PIN automatically each
time the system boots up.
Note: Please ask your local GSM ISP to see whether your SIM card
Null