Maxon MULTIMAX MA 2040 - Page 32

!
MULTIMAX(USER(GUIDE(
31!
!
requiring PIN or not.
If you want to change the SIM PIN, please click the button to enable
it, and then input the new PIN.
Connection
Mode
Select from “Always Online” and “Connect On Demand”.
Always Online: Router will automatically to establish a GPRS/3G
connection after power on and each restarts, this will remain and will
be re-established after an interruption.
Connect On Demand: After selection this option, user could
configure Triggered by Serial Data, Triggered by Periodically
Connect and Triggered by Time Schedule.
Note: If you select several connect on demand polices, router only
have to meet one of them to be triggered.
Connect
On
Demand
Redial
Interval
Router will automatically re-connect with this interval when it fails
communicating to peer via TCP or UDP
30
Max Retries
The maximum retries times for automatically re-connect when router
fails to dial up.
After maximum retries, router will reboot the wireless module. If router
still cannot dial up successfully, it will try to switch to the other SIM
card. Then router will re-connect with the other SIM card with
maximum retries.
When connecting successful, the Max Retries counter will be set to 0.
3
Inactivity
Time
You can configure this field after setting router under “Connect On
Demand” mode.
This field specifies the idle time setting for GPRS/3G
auto-disconnection and trying to revert back to preferred SIM card.
0 means timeless.
0
Serial Output
Content
The content which output to the serial device which connect to
router and inform it that router is ready to receive serial data.
Null
Triggered by
Serial Data
Tick this checkbox to allow router automatic connects to cellular
network from idle mode when there is data come out from serial
port.
Enable
Periodically
Connect
Tick this checkbox to allow router automatically connects to cellular
network with preset interval which you preset in Periodically Connect
Interval.
Enable
Periodically
Connect
Interval
Periodically Connect Interval for Periodically Connect.
300
Time
Schedule
Select the Time Range to allow router automatically connects to
cellular network during this time range.
NULL
Time Range
Adding the Time Range for Time Schedule. You can set the days of
one week and at most three ranges of time of one day.
Null
Main SIM
Card
Set the preferred SIM card from SIM 1 or SIM 2.
SIM1
When
Connection
If router cannot dialup or ping the preset address timeout
continuously for Max Retries time, it will switch to the other SIM card.
Enable