Maxon MULTIMAX MA 2040 - Page 60

!
MULTIMAX(USER(GUIDE(
59!
!
Client
Advanced
Local IP
Set the IP address of the PPTP client.
You can enter the IP which assigned by PPTP server. Null means
PPTP client will obtain an IP address automatically from PPTP
server’s IP pool.
Null
Remote IP
Enter the remote peer’s private IP address or remote subnet’s
gateways address.
Null
Address/Contr
ol Compression
Used for PPP initialization. In general, you need to enable it as
default.
Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as
default.
Enable
Asyncmap
Value
One of the PPTP initialization strings. In general, you don’t need
to modify this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size
of packet, which is possible to receive in a given environment.
1500
MTU
Maximum Transmission Unit. It is the identifier of the maximum size
of packet, which is possible to transfer in a given environment.
1436
Link Detection
Interval
Specify the interval between PPTP client and server.
To check the connectivity of a tunnel, the client and server
regularly send PPP Echo to each other. If the client or server
receives no response from the peer within a specified period of
time, it retransmits the PPP echo. If it receives no response from
the peer after transmitting the PPP echo for max retries times, it
considers that the PPTP tunnel is down and tries tore-establish a
tunnel with the peer.
30
Link Detection
Max Retries
Specify the max retries times for PPTP link detection.
5
Expert Options
You can enter some other PPP initialization strings in this field.
Each string can be separated by a space.
noccp
nobsdcom
p
Please add
PPTP Client
Click “Add” to add a PPTP client. You can add at most 3 PPTP
clients.
Click “ ” to delete a PPTP client.
Please
add PPTP
Client