Maxon MULTIMAX MA 2040 - Configuration Examples; Cellular Dial-Up Configuration Examples

!
!
!
!
60(
MULTIMAX(USER(GUIDE!
!
Server
PPTP Server @ PPTP
Item
Description
Default
Enable PPTP
Server
Tick to enable PPTP server.
Disable
Username
Set the username which will assign to PPTP client.
Null
Password
Set the password which will assign to PPTP client.
Null
Authenticatio
n
Select from “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
PPTP client need to select the same authentication method based on
this server’s authentication method.
CHAP
Local IP
Set the IP address of PPTP server.
10.0.0.1
IP Pool Start
Set the IP pool start IP address which will assign to the PPTP clients.
10.0.0.2
IP Pool End
Set the IP pool end IP address which will assign to the PPTP clients.
10.0.0.10
0
Enable MPPE
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a
protocol for encrypting data across PPP and VPN links.
Disable
Enable PPTP
Tick to show the PPTP server advanced setting.
Disable