Maxon MULTIMAX MA 2040 - Page 62

!
MULTIMAX(USER(GUIDE(
61!
!
Server
Advanced
Address/Cont
rol
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default.
Enable
Asyncmap
Value
One of the PPTP initialization strings. In general, you don’t need to
modify this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of
packet, which is possible to receive in a given environment.
1500
MTU
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
1436
Link
Detection
Interval
Specify the interval between PPTP client and server.
To check the connectivity of a tunnel, the client and server regularly
send PPP Echo to each other. If the client or server receives no
response from the peer within a specified period of time, it retransmits
the PPP echo. If it receives no response from the peer after
transmitting the PPP echo for max retries times, it considers that the
PPTP tunnel is down and tries tore-establish a tunnel with the peer.
30
Link
Detection
Max Retries
Specify the max retries times for PPTP link detection.
5
Expert
Options
You can enter some other PPP initialization strings in this field. Each
string can be separated by a space.
noccp
nobsdco
mp
Route Table
List
Click “Add” to add a route rule from PPTP server to PPTP client.
Null