Maxon MULTIMAX MA 2040 - Page 39

!
!
!
!
38(
MULTIMAX(USER(GUIDE!
!
Access Using
HTTP
side via HTTP.
Remote
Access Using
TELNET
Enable to allow users to access the router remotely on the internet
side via Telnet.
Enable
Remote
Access Using
SNMP
Enable to allow users to access the router remotely on the internet
side via SNMP.
Enable
Remote Ping
Request
Enable to make router reply the Ping requests from the internet side.
Enable
Defend Dos
Attack
Enable to defend dos attack. Dos attack is an attempt to make a
machine or network resource unavailable to its intended users.
Enable
Filtering
Filtering @ Firewall
Item
Description
Default
Default Filter
Policy
Select from “Accept” and “Drop”.
Accept: Router will reject all the connecting requests except the
hosts which fit the filter list.
Drop: Router will only accept the connecting requests from the hosts
which fit the filter list.
Accept
Add Filter List
Click “Add” to add a filter list.
Null
Action
Select from “Accept” and “Drop”.
Accept: Router will reject all the connecting requests except the
hosts which fit this filter rule.
Drop: Router will only accept the connecting requests from the hosts
which fit this filter rule.
Accept
Source IP
Defines if access is allowed from one or a range of IP addresses
which are defined by Source IP Address, or every IP addresses.
Null
Source Port
Defines if access is allowed from one or a range of port which is
defined by Source Port.
Null
Target IP
Address
Defines if access is allowed to one or a range of IP addresses which
are defined by Target IP Address, or every IP addresses.
Null
Target Port
Defines if access is allowed tone or a range of port which is defined
by Target Port.
Null