Maxon MULTIMAX MA 2040 - Page 66

!
MULTIMAX(USER(GUIDE(
65!
!
Delimiter1/2 (Hex)
@Transparent
Enter the delimiter in Hex.
0
Delimiter Process
@Transparent
The Delimiter process field determines how the data is handled
when a delimiter is received.
None: Data in the buffer will be transmitted when the delimiter
is received; the data also includes the delimiter characters.
Strip: Data in the buffer is first stripped of the delimiter before
being transmitted.
Strip
Local Port
@Modbus
Enter the Local port for Modbus.
0
Attached serial
device type
@Modbus
Select From “Modbus RTU slave”, “Modbus ASCⅡ slave”,
“Modbus RTU master” and “Modbus ASCⅡ master”.
Modbus RTU slave: router connects to slave device which works
under Modbus RTU protocol.
Modbus ASCⅡ slave: router connects to slave device which
works under Modbus ASCⅡprotocol.
Modbus RTU master: router connects to master device which
works under Modbus RTU protocol.
Modbus ASCⅡ master: router connects to master device which
works under Modbus ASCⅡ protocol.
Modbus
RTU slave
Modbus Slave
@Modbus
Add the Modbus slaves which will be polled by Modbus master
(router). This section only displayed when you select “Modbus
RTU master” or “Modbus ASCⅡ master” in “Attached serial
device type”.
Null
Slave Address
This connection is usually used to connect to the Modbus slave
devices which as TCP server. Enter IP address of the TCP server.
Null
Slave Port
Enter the port number of TCP server.
Null
ID
Enter the ID number of TCP server.
Null