Maxon MULTIMAX MA 2040 - Page 82

!
MULTIMAX(USER(GUIDE(
81!
!
Configuration--->NAT/DMZ--->Port Forwarding
Note: This section will be hidden if user selects “Cellular as primary and if fail use Eth0” in
“Configuration ->Link Management”.
Explanations for above diagram:
If there are two IP addresses 58.1.1.1 and 59.1.1.1 for the External Devices, that the result will be
different from the test when the NAT is working at MA-2040.
58.1.1.1----------access to--------->58.1.1.2:9990----------be forwarded to------->10.1.1.1:8000 TCP
58.1.1.1----------access to--------->58.1.1.2:9991----------be forwarded to------->10.1.1.2:8001 UDP
58.1.1.1----------access to--------->58.1.1.2:9992----------be forwarded to------->10.1.1.3:8002 TCP&UDP