Maxon MULTIMAX MA 2040 - Page 97

!
!
!
!
96(
MULTIMAX(USER(GUIDE!
!
MA-2040# write //save current configuration
Building configuration...
OK
MA-2040# reload
!Reboot the system ?'yes'or 'no':yes //reload to take effect
Example 5: CLI for Cellular dialup
MA-2040> enable
Password: *****
MA-2040#
MA-2040# show link-management
*********************************************
wan link : Cellular Only // now “Cellular Only” as wan-link
ICMP primary server : 8.8.8.8
ICMP second server : 8.8.8.4
ICMP detection interval : 30 seconds
ICMP detection timeout : 3 seconds
ICMP detection retries : 3
reset the interface : no
*********************************************
MA-2040(config)# set cellular
1. set SIM_1 parameters
2. set SIM_2 parameters
->please select mode(1-2)[1]:
SIM 1 parameters:
network provider
1. Auto
2. Custom
3. china-mobile
->please select mode(1-3)[1]:
->dial out using numbers[*99***1#]:
->pin code[]:
connection Mode: