QOS Basic
Bandwidth management prioritizes the traffic on router. Interactive traffic
(telephony, browsing, telnet, etc.) gets priority and bulk traffic (file transfer, P2P)
gets low priority. The main goal is to allow both types to live side-by side without
unimportant traffic disturbing more critical things. All of this is automatic.
QoS allows control of the bandwidth allocation to different services, netmasks,
MAC addresses and the four LAN ports.
Uplink (kbps)：To use bandwidth management (QoS) users must enter
bandwidth values for their uplink. These are generally 80% to 90% of your
maximum bandwidth.
Downlink (kbps)：To use bandwidth management (QoS) users must enter
bandwidth values for their downlink. These are generally 80% to 90% of your
maximum bandwidth.
To Next Page
Loading...
