Bandwidth Monitoring-Wireless (W10) Graph
horizontal axis: Time
vertical axis: Speed rate
LAN & WAN Setup
LAN and WAN setup allow users to configure Local area network settings and
Wide area network settings. When LAN tab is clicked, users will be able to
configure Local IP address, Subnet Mask, Gateway and Local DNS along with
DHCP settings and NTP client settings under LAN setup. For WAN Setup, users
can configure modem to connect to 4G or 3G network, or a wired connection.
Default is 4G connection. Router can be configured for Automatic DHCP
configuration if any device connects to WAN port. Dual link option, WAN Nat and
other optional settings can be configured.
To Next Page
Loading...
