Users may specify priority for all traffic from a given IP address or IP Range,
protocol (TCP,UDP, ICMP or TCP/UDP), source port range and destination port
range, and the priority (“band”) packets matching the specification will use.
Check all values and click Save Settings to save settings. Click the Cancel
changes button to cancel unsaved changes.
MAC Priority
Users may also specify priority based on the client MAC address – this is more
specific and harder to spoof than IP addresses.
Security
Firewall
Users can enable or disable the firewall, filter specific Internet data types, and
prevent anonymous Internet requests, ultimately enhance network security.
Firewall Protection
Firewall enhance network security and use SPI to check the packets into the
network. To use firewall protection, choose to enable otherwise disabled. Only
To Next Page
