Radius Shared Key: Transactions between the client and RADIUS accounting
server are authenticated using a shared secret, which is never sent over the
network.
Advanced Networking
Advanced Routing
Operating Mode: Gateway and Router
If the MA-6060 is acting as your primary gateway to the internet, select “gateway”,
otherwise select “router”.
Dynamic Routing
If you want the router to participate in dynamic routing protocols such as RIP etc
running on your network(s), you should enable this option. To enable the Dynamic
Routing feature for the WAN side, select WAN. To enable this feature for the LAN
and wireless side, select LAN&WLAN. To enable the feature for both the WAN
and LAN, select Both. To disable the Dynamic Routing feature for all network
interfaces, keep the default setting, Disable.
Note：Dynamic Routing is not available in Gateway mode
To Next Page
Loading...
