LCP Echo Failure: Timeout value for LCP echo response packets.
Idle Time: Set idle time, idle time at the appropriate time to release the PPPoE
Authentication: including local and Radius (Remote Authentication Dial In User)
Local User Management（CHAP Secrets）
User: Set PPPOE client's user name
Password: Set PPPOE client's user password
IP Address: Set PPPOE client's user IP address
Enable: Enable or disable this setting
Radius
Radius Server IP: Set the RADIUS Server IP address
Radius Authentication Port: Set the RADIUS server Authentication Port
Radius Accounting Port: Set the RADIUS server Accounting Port
To Next Page
Loading...
