Remote Access: This feature allows users to manage the router from a remote
location, via the Internet. To disable this feature, keep the default setting, Disable.
To enable this feature select Enable and use the specified port (default is 8080)
on your PC to remotely manage the router. You should also change the router's
default password to one of your own, if you haven't already.
To remotely manage the router, enter http://xxx.xxx.xxx.xxx:8080 (the x's
represent the router's Internet IP address, and 8080 represents the specified port)
in your web browser's address field. You will be asked for the router's password.
If users use https you need to specify the URL as https://xxx.xxx.xxx.xxx:8080 (not
all firmware’s does support this without rebuilding with SSL support).
SSH Management：You can also enable SSH to remotely access the router by
Secure Shell. Note that SSH daemon needs to be enable in Services page.
Note：
If the Remote Router Access feature is enabled, anyone who knows the
router's Internet IP address and password will be able to alter the router's
settings.
Telnet Management：Enable or disable remote Telnet function
Cron：The cron subsystem schedules execution of Linux commands. You'll need
to use the command line or start up scripts to actually use this.
To Next Page
Loading...
