Host Name: host name of LAN client (“*” if client does not supply a name during
DHCP negotiation)
IP Address: IP address of the client
MAC Address: MAC address of the client
Conn. Count: count of connections from the client
Ratio: what percentage of the maximum allowed connections to the router this
device is using.
DNCP Server: Status of DHCP server – “enabled” or “disabled”
DHCP Daemon: The DHCP server process - DNSMasq or uDHCPd
Start IP Address: The starting IP Address of the DHCP server’s Address pool
End IP Address: The ending IP Address of the DHCP server’s Address pool
Client Lease Time: The lease time of DHCP client
To Next Page
Loading...
