EasyManua.ls Logo

Maxon Quadmax MA-6060 - Wired WAN - Static Configuration; Wired WAN - DHCP Configuration

Maxon Quadmax MA-6060
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wired WAN - Static
WAN IP Address: IP address of the WAN interface
Subnet Mask: subnet mask of the WAN interface
Gateway: the default gateway address
Static DNS1/DNS2/DNS3: upstream DNS server IP addresses
Note that for use in your own internal network, your network administrator can
supply these details. Where you are using an ISP or other upstream service
provider, that supplier can supply you with the required details.
Wired WAN - DHCP
IP address, netmask and default gateway of WAN port is all set automatically via
DHCP. This is useful when modem is connected to another router via its WAN
Port.

Related product manuals