PPPOE
Fixed WAN IP: enable if you have a known static IP
WAN IP Address: Where Fixed WAN IP is enabled, enter WAN IP here
Fixed WAN GW Address: enable if you have a known static IP for the WAN
default gateway.
WAN GW Address: where Fixed WAN GW Address is enabled, enter GW
address here
Dial Failure to Restart: Should modem reboot on PPPoE connection failure.
Force reconnect: .
STP: If you have multiple links, STP helps prevent routing loops.
3G Link - dialup
This option forces a 3G style connection (PPP).
Settings are the same as per DHCP-4G, except that:
• Authentication also includes “MS-CHAP” and “MS-CHAPv2”
• Additional option “PPP Asyncmap”
To Next Page
Loading...
