Console: the log information output to console port
Web: the log information is available via the router webpage under
“Administration” menu
Remote Server: if choose net mode, users should input a syslog server’s IP
Address (only visible if “Net” selected from “Syslog Out Mode”)
Telnet
Telnet: enable a telnet server to connect to the router with telnet. The username is
admin and the password is the router's password.
Note: If users use the router in an untrusted environment (for example as a public
hotspot), it is strongly recommended to use SSHd and deactivate telnet, as the
router login information is sent without encryption in the telnet protocol.
WAN Traffic Counter
Ttraff Daemon: enable or disable wan traffic counter function
To Next Page
Loading...
