Wireless Mode
• AP – access point: modem acts as WiFi “server”
• Client – modem uses WiFi as WAN connection
• Adhoc – use “peer-to-peer” mode (no AP)
• Repeater – router connects to the same SSID as the one it broadcasts.
This ‘extends” the range of the WiFi network, but introduces additional
latency and constrains bandwidth
• Repeater Bridge – as per repeater, but also bridge WiFi network to wired
LAN network.
Wireless Network Mode：
Disabled
disable this interface. You can use this to prevent 2.4 and/or 5 GHz bands being
used on an individual basis
Mixed
Support 802.11b, 802.11g, 802.11n wireless devices.
BG-Mixed
Support 802.11b, 802.11g wireless devices.
B-only
Only supports the 802.11b standard wireless devices.
G-only
To Next Page
Loading...
