Encryption
There are two levels of WEP encryption, 64-bit (40-bit) and 128-bit. To utilize
WEP, select the desired encryption bit, and enter a passphrase or up to four WEP
key in hexadecimal format. If you are using 64-bit (40-bit), then each key must
consist of exactly 10 hexadecimal characters or 5 ASCII characters. For 128-bit,
each key must consist of exactly 26 hexadecimal characters. Valid hexadecimal
characters are "0"-"9" and "A"-"F".
ASCII/HEX: ASCII, the keys is 5-bit ASCII characters/13bit ASCII characters.
HEX, the keys is 10bit/26-bit hex digits.
Passphrase：The letters and numbers used to generate a key.
Key1-Key4：Manually fill out or generated according to input the pass phrase.
WPA Personal/WPA2 Personal/WPA2 Person Mixed
TKIP/AES/TKIP+AES，dynamic encryption keys. TKIP + AES, self-applicable
TKIP or AES. WPA Person Mixed, allows WPA Personal and WPA2 Personal
client mix.
WPA Shared Key：Between 8 and 63 ASCII character or hexadecimal digits. 。
Key Renewal Interval in seconds）：1-99999。
To Next Page
Loading...
