User interface on the TV screen
You can do individual settings of your receiver using the menus in the user interface.
For this purpose, both the receiver and the TV set need to be switched on and connected
by a cable (e.g. SCART or HDMI).
Press the MENU key. The main menu will be displayed.
By pressing the EXIT key or the MENU key again, you can exit this menu.
Navigation within the menus
Top (arrow 1): Menu name
Left (arrow 2): Menu symbols
Middle (arrow 3): Sub menu
1
2 3
MXL020HD INSTRUCTIONS REVISION.indd 16 15/05/2013 14:12
To Next Page
Loading...