Bluetooth Receiver and APP Usage
The cockpit of your training device is equipped with an integrated Bluetooth receiver that allows you to control the device using
a smartphone or tablet PC via an app. The following apps are currently compatible with this training device:
-iC+Training
-Kinomap
-Zwift
-MyHomeFit (available only for Android)
Please note that the use of apps may be subject to charges. MAXXUS Group GmbH & Co. KG is neither the manufacturer nor the
distributor of the apps and therefore cannot be held responsible for their content or functionality. If you encounter any issues or have
questions regarding the apps, please contact the respective app manufacturer directly. You can find their contact information in the
respective app stores.
To connect your training device to an app, follow these steps:
Step 1
Download the desired app from the relevant app store onto your smartphone or tablet PC.
Step 2
Ensure that the Bluetooth function on your smartphone or tablet PC is enabled.
Step 3
Open the app and follow the instructions provided by the app manufacturer.
ATTENTION: The Bluetooth connection between your training device and the app can only be established through the app itself.
Connecting via the Settings menu or Bluetooth settings of your smartphone or tablet PC is not possible.
23
Mains Adapter
Take the connection cable of the mains adapter (D08) included in the delivery. Plug the connection cable into the socket on
the front of the main frame (A01). Then, connect the mains adapter (D08) to a power socket.
CAUTION:
This device should only be connected to an earthed socket that has been installed by a qualified electrician. Do not use
a socket strip for the connection. If an extension cable is necessary, ensure that it complies with the VDE regulations and
guidelines.
Connecting the Device
CAUTION:
Before connecting the mains adapter to the device, always ensure that you are using the mains adapter supplied specifically
with the device. Using a different mains adapter may result in damage to the electronic components, for which
the manufacturer cannot be held liable.
When connecting the device to the power supply, always connect the power cable to the exerciser first before plugging it
into a power outlet. Likewise, when disconnecting the exerciser from the power supply, always disconnect the power cable
from the mains first.
Switching on the Device
First connect the power cable to the exerciser and then connect the mains cable to the power socket, the cockpit turns on
automatically. If the training device is already connected to the mains, but the cockpit is in stand-by
mode, activate the cockpit by pressing any key or by moving the pedals.
Turning off the Device
When inactive for more than 4 minutes, the cockpit automatically switches to stand-by mode. Once you have finished your
workout you should always disconnect the exerciser from the mains. Always unplug the mains cable from the wall socket
first and then remove the power cable.
Mains Connection
Cockpit
To Next Page
Loading...
Need help?
General
