ELECTRONIC CLOCK AND OVEN CONTROL
SET
+
E °
The electronic clock and oven control on your Cancel Pad
Maytag wail oven is used for the time-of-day Press this pad to cancel all operations except the
clock, timer, bake, broil, delay start and self- time-of-day clock and timer. If yon are ever
clean functions. A beep will sound each time a unsure if you've programmed the control
function pad is pressed. At the end of an correctly, press tile CANCEL pad and start over.
operation, consecutive beeps will sound.
The display on the control will blink when power Set Knob
is first supplied to the wall oven or if there is a Turn this knob in either direction to enter the
power failure. Once the time-of-day clock has time or temperature desired. This knob is also
been set (see Setting the Clock, page 5), the used to select Hi or Lo broil.
display will stop blinking.
.timer Pad
The timer can be set from 5 seconds to 9 hours,
50 minutes. It will count down by minutes (when
set for i hour or more time) or seconds (when
set for less than I hour). See page 5 for
instructions on setting the timer.
Clock Pad
Use this pad to set the time-of-day clock. For
The following pads and knobs are found on your instructions to do this, see page 5.
Maytag electronic clock and oven eontroh
You may also press this pad to recall the current
time-of-day. For example, if the timer is
counting down in the display, press the CLOCK
pad to return the current time to the display.
The timer will continue to eonnt down and a
signal will sound when the time ex_pires.
PAGE 4
To Next Page
Loading...
Need help?
General
