Maytronics Dolphin Classic 5 - Operating the Pool Cleaner; Initial Setup and Pool Entry

4
Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions
5. USING THE POOL CLEANER
5.1 Set Up
Initial float set up prior to first use - Classic 5 model only
•Placecableattherightsideinfrontofthehandle.
•Floatpositionwithvarioustypeofbrushes:
Attach the floating cable to the
power supply by inserting it
with the notch on the
connector (1) lined up with the
groove in the socket on the
power supply and turning
clockwise (2).
click
click click
click
click
click
click
click
click
click
click
click
click
click click
click
•Pulloatout
GFI/ELI
40°C Max
104°F Max