Maytronics Dolphin Classic 5 - Impeller and Cable Care

Dolphin Classic 5 / Top 5 Pool Cleaner | Operating Instructions
7
To remove the kinks,
stretch the cable out
completely and let it
sit for at least a day in
the sun.
If you notice debris trapped in the impeller open the impeller and remove the debris.
If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
•Makesurethatnowaterisleftinthepoolcleaner.
•Thoroughlycleanthelterbagandinsertinplace.
•Rollupthecablesothatithasnokinksandplace
on the Caddy.
•StorethepoolcleaneruprightontheCaddyin
a protected area out of direct sun/rain/frost at a
temperature of between 5˚- 45˚C / 41˚- 113˚F .
5.5 Off-season storage
Cleaning the impeller
Unplug the power supply.
Cable
A
B
Ph
Ph
A
B
Ph
Ph
No. 2