Maytronics Dolphin M700 - Using the Robotic Pool Cleaner; Setup Guide for First Use

5
5. USING THE ROBOTIC POOL CLEANER
5.1 Setup
Before using the Robotic Pool Cleaner for the first time, perform the following steps:
Position the power supply
at approximately the middle of the
long side of the pool, at least at
a distance of 3.5m/12ft. from the
pool's edge.
Unwind the cable and stretch it out completely so that it
has no kinks.
Attach the floating cable to the power supply:
Insert the cable with the notch on the connector (1),
lined up with the groove in the socket on the power
supply, and turn clockwise (2).
11cm/4 in
minimum
11cm/4 in
minimum
5.1.25.1.1
5.1.3
1
2