Maytronics M1 - Cleaning Filter Basket (Model M1;MT1) - After Use

8
Robotic Pool Cleaner M1 / M1B / MT1 | User Instructions
7. CLEANING THE FILTER BASKET - MODEL M1 / MT1
CAUTION
Make sure the power supply is switched off and unplugged.
It is highly recommended to clean the filter basket after each cleaning cycle.
Note: Do not let the filter basket dry out before cleaning.
Open the filter cover.
Upon opening the filter cover,
the handle will lift independently.
7.1.1
7.1.2
Lift up the basket.
Open the latch
to release the bottom
lid in order to remove
the debris.
7.1.3
7.1.4
Clean the filter basket with a hose.
7.1.5
1
2
7.1 Cleaning after use - removing and cleaning the filter basket