Maytronics M600 - Removing the Cleaner from the Pool

8
M600 / ZENIT 60 / ACTIVE X6 / ACTIVE ULTIMATE Robotic Pool Cleaner | User Instructions
Place the Robotic Pool Cleaner on the side of the pool
and let the water drain out.
Option A
The easiest and most fun way to get the robot out of the water:
1. Log into the MyDolphin™ Plus app and click "Pick-up mode".
2. The robot will reach the wall closest to it and will rise above the water surface.
3. Grab the robot by the handle and pull it out the water.
Option B
Use the floating cable to pull the Robotic Pool Cleaner to the side of the pool.
Use the handle to remove the robot from the pool.
WARNING
Please use the cable to pull the robot to the surface, then use the handle.
5.7.3
5.7.2
Turn OFF the power supply.
5.7.1
5.7 Removing the Robotic Pool Cleaner from the pool
WARNING