EasyManua.ls Logo

Mazda 3 2020 - Page 175

Mazda 3 2020
720 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After the battery terminals are
disconnected for some reasons such
as for battery replacement.
(SKYACTIVX 2.0)
After PM removal is performed by
the petrol particulate filter.
(SKYACTIVD 1.8)
After PM removal is performed by
the diesel particulate filter.
Engine does not restart
If the following operations are
performed while the idling is stopped,
the engine will not restart for safety
reasons. In such cases, start the engine
using the normal method.
(European model)
The bonnet is opened.
The driver's seat belt is unfastened
and the driver's door is opened.
(With M Hybrid)
Automatic transmission
The driver's seat belt is unfastened
and the driver's door is opened.
Manual transmission
The driver's door is opened.
Engine-stop period is short or time
until next engine idle stop is long
The ambient temperature is high or
low.
The battery power is depleted.
Power consumption by the vehicle's
electrical parts is high.
Engine restarts automatically while
engine idling is stopped
Under the following conditions, the
engine restarts automatically.
The i-stop OFF switch is pressed until
the beep sounds.
The air conditioner is operated with
the airflow mode in the
position.
The temperature setting dial of the
air conditioner is in the maximum
heating or maximum cooling (A/C
ON) position.
(Automatic air-conditioning)
The cabin temperature is largely
dierent from the set temperature of
the air conditioner.
The brakes are released slightly on a
slope and the vehicle begins to
move.
Two minutes have elapsed since the
idling was stopped.
The battery power is depleted.
(Automatic transmission)
Engine idling is stopped while the
vehicle is stopped
The accelerator pedal is depressed
with the selector lever in the D or
M (not in second gear fixed mode)
position.
The selector lever is shifted to the R
position.
The selector lever is shifted from N
or P position to D or M (not in
second gear
fixed
mode) position.
The steering wheel is operated
with the selector lever in the D or
M (not in second gear fixed mode)
position.
The selector lever is in the M
position and the second gear fixed
mode is selected.
The steering wheel is operated.
Engine idling is stopped while
driving
The selector lever is in a position
other than the D position.
The accelerator pedal is depressed.
Sport mode is selected.
The steering wheel is operated.
When Driving
Start/Stop Engine
4-17
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36

Table of Contents

Related product manuals